RockSolid Garage Floor Coating Creates Party-Ready Space

Article Posted By: Rust-Oleum

RockSolid Garage Floor Coating Creates Party-Ready Space

Garage before application of garage floor coating

With lots of space, easy cleanup, and direct access to the outside, your garage is the perfect place for parties. Here’s how you can wake up your tired garage with a party-ready, gorgeous metallic floor that’s durable and drive-on ready in just one weekend. We’ll be applying Rust-Oleum’s RockSolid garage floor coating.

Applying RockSolid Garage Floor Coating


Materials needed to apply garage floor coating

Materials

Before You Start
Read through all instructions in your garage floor coating kit regarding proper floor preparation before you begin. A few things you may need to do include sweeping, degreasing, and patching your concrete floor. You will also need to use the concrete etch included in your kit to etch the floor before coating. Once your floor is clean, allow 24 hours for it to dry. It’s important that your floor is completely moisture-free before you begin coating. See the instructions included in your kit for more details on how to tell if your floor is dry enough.

Step 1: Tape Off Edges

How to apply garage floor coating
Once your floor is clean, completely dry, and ready for coating, use high quality painter’s tape to tape off the walls of the garage. This will give you a clean line when you apply the coating.


Step 2: Lay Out Drop Cloth

How to apply garage floor coating
While you’re mixing the coating, you’ll want to protect your garage floor from drips and spills with a drop cloth.


Step 3: Knead

How to apply garage floor coating

Knead the floor coating pouch thoroughly to aid in mixing the product.

IMPORTANT: Only work with one pouch at a time. If you need multiple pouches to cover your floor, finish applying the contents of the first pouch before you mix another. Use a fresh roller and bucket for each kit.


Step 4: Burst

How to apply garage floor coating

How to apply garage floor coating
Then, lay it flat on your drop cloth and roll it from the Part A side toward the Part B side (like a tube of toothpaste) until the middle seal bursts.


Step 5: Shake

How to apply garage floor coating
Vigorously shake the pouch to mix both components. Shake up and down, and side to side for two to three minutes.

TIP: Once the product is mixed, the coating is activated and needs to be applied within 45-60 minutes.


Step 6: Pour

How to apply garage floor coating
How to apply garage floor coating
Cut off a corner of the pouch with scissors and pour the coating into your bucket.


Step 7: Add Metallic Tint

How to apply garage floor coating

Open the metallic tint powder and pour it into the bucket as well.


Step 8: Mix in Metallic Tint

How to apply garage floor coating
How to apply garage floor coating

Using a helix paint mixer and drill, thoroughly mix the tint into the garage floor coating. While you mix, use the stir stick included in your kit to periodically scrape the sides of the bucket. This will ensure that the tint is evenly distributed throughout the mixture.


Step 9: Cut In Around Edges

How to apply garage floor coating
Use your chip brush to paint around the perimeter of the garage floor (the areas you taped off in Step 1).


Step 10: Pour Onto Floor

How to apply garage floor coating
How to apply garage floor coating

Working in 5 x 5 ft. sections, pour the coating directly onto the floor in a ribbon, about a foot from the back wall. The ribbon of coating should be 4 to 5 ft. long and 3 to 4 in. wide to cover your first section.


Step 11: Roll

How to apply garage floor coating
Roll the garage floor coating onto the floor evenly until your 5 x 5 ft. section is completely coated. Some spots may appear somewhat see-through.

How to apply garage floor coating

How to apply garage floor coating

Now that the area is covered, use your roller to re-roll over the area, this time in a circular motion (like applying wax to a car). These circular patterns will create a dynamic metallic effect in the floor.


Step 12: Repeat Over Entire Floor

How to apply garage floor coating
Repeat this process, continuing to work in 5 x 5 ft. sections until the garage floor is completely coated. Only open an additional kit after you’ve completely used up the coating from the previous. Each kit covers 100-125 square feet (two kits are needed for a one-car garage).


Step 13: Let Dry/Cure

Let the garage floor coating dry for eight to 10 hours before allowing foot traffic, and at least 24 hours before returning your car to the garage.

RockSolid Garage Floor Coating Creates Party-Ready Space

RockSolid Garage Floor Coating Creates Party-Ready Space

Once the floor is completely dry, your new garage is ready for entertaining!

To get this look, we added a party table made from saw horses and finished off with Varathane Wood Stain in Worn Navy, bar stools spray painted with Stops Rust Satin in Classic Navy and Stops Rust Silver Metallic, a custom drink tub spray painted with Rust-Oleum Stops Rust in Gloss Tuscan Sun. We also added fun chalkboard surfaces to the cabinets and table top with Rust-Oleum Chalkboard Paint.

Browse all Rust-Oleum products available at The Home Depot. Follow our Easy DIY Projects board on Pinterest for more DIY ideas.

Related Pinned Items